| Product Name: |
pH controller. |
| Model: |
HBM-50. |
| Measurement Range: |
pH;-0.2~14.2pH. (Resolution; 0.01pH) mV;-610~610mV. (Resolution; 1mV) Temp;-5-105°C. (Resolution; 0.1°C).
|
Repeatability:
|
±0.02pH at electric potential input equivalent to pH electromotive force.
|
| Transmission Output: |
4~20mADC adjustable setting within 0~14pH for the range specified more than 2pH band with increase by 1pH.
|
| Control Output: |
Independent output contacts for lower and upper limits, available to switch over to output of maintenance signal or warning signal by key setting. Rating; 240VAC 1A or 50V DC 0.5A.
|
Calibration:
|
Simple keypad operation for calibration with two types of buffer solution registered as memory out of pH1.68, 4.01, 6.86,9.18, 10.01.
|
| Output During Maintenance: |
Specify one among Dummy, Hold or Through. |
| Zero Adjustment: |
Adjustable between -90mV~90mV. |
| Slope Adjustment: |
47.3~63mV/pH. Zero Shift: ±1.00pH. |
| Temp. Calibration Range: |
±5°C |
| Temp. Compensation of pH Value: |
±0.100pH/°C |
| Manual Temp. Compensation: |
0~100°C |
| Burnout Function: |
Active in emergency cases. |
| Power Source: |
100~240V AC, 50/60Hz |
| Mode Control Input: |
Switches measure./ maintenance mode. |
| Power Consumption: |
5VA : |
| Installation: |
Panel cut-out; 45 x 45(mm). |
| Panel Thickness: |
Max. 4.0mm. |
CE marked subcompact analyser series.