Important Note: The Electronic and Measuring Instrument products range has been sold toHIOKI E.E. CORPORATION. Please contact them directly for information about how to purchase these products. |
|
|
Models FS-1141 & FS-1341, ranging from 1MHz to 1.6GHz/3.2GHz, offer 1ms ultra high speed change-over in both frequency and output level. These features useful for automated testing of devices used in semi-micro wave band for mobile communications and digital broadcasting.
|
|
|
Features |
-
Fast switching time at frequency of 1ms.
-
High resolution and continuously changeable frequency, Whole frequency range can be set in 0.1Hz.
-
Output level changeable in 0.1dB step With the installation of optional output unit FF-702, the output level can be manually or remotely set in 0.1dB steps.
-
Output level also changeable at frequency of 1ms Semi permanent life attained with use of semiconductor relay for change-over device.
-
Semi-automated output by memory function Up to 100 steps of frequency, output voltage & level with optional output unit FF-702 storable at 6 different program area and recalled in turn by panel key operation.
-
GP-IB controllable Externally controllable with GP-IB interface GP-07F.
-
Isolated BCD interface provided as an option. It permits to set frequency and output level speedily and externally, also enables isolation against externally controlled instrument.
-
Wide measuring range from ultra low density ug/l to high concentration mg/l.
|
|
Specifcations |
Model: |
FS-1141 |
FS-1341. |
Frequency Range: |
1MHz to 1.6GHz. |
1MHZ to 3.2GHz. |
Freq. Resolution: |
0.1Hz but 0.01Hz at control time by GP-IB or isolation BCD interface.
|
0.1Hz but 0.01Hz at 1.6GHz, 0.02Hz at >1.6GHz at control by GP-IB or isolation BCD interface.
|
Freq. Accuracy: |
±5 x 10-6 /0 - 40? |
Freq. Change-over Time: |
1ms typical. |
Phase Noise: |
Less than –100dBc/Hz( 10kHz offset at 1GHz). |
Harmonic Wave Attenuation:
|
Less than –30dB at 2nd,3rd harmonic wave.
|
Less than –30dB 2nd,3rd harmonic wave ?1.6GHz less than 25dB 2nd,3rd harmonic wave >1.6GHz.
|
Spurious Attenuation: |
Less than –60dB. |
-60dB typical. |
Freq. Characteristics: |
1.5dB. |
±1.5dB ?1.6GHz ±2.5dB >1.6GHz. |
Output Level: |
Max. + 13dBm. |
Output Calib. Accuracy: |
±0.5dB/0 – 40? at 100MHz CAL. +13dBm. |
Output impedance: |
50O unbalance. |
Ext.ref.oscillation Input: |
10MHz. |
Ref. freq. output: |
10MHz. |
Memory Function: |
Freq. and output voltage/level (when FF-702 used) up to 100 step each at 6 program areas can be saved and recalled.
|
Indicator: |
Green 7-segment LED. |
Power Source: |
100, 120, 220, 240VAC±10%, max. 250V 50/60Hz, approx.80VA. |
External Dimensions: |
Approx. 425(w) x 149(h) x 450(d)mm. |
Weight: |
Approx. 15kgs. |
Standard Accessories: |
Power cord, instruction manual 1 each. |
|
|
Options |
(When ordering, please specify required options.) |
|
Output unit FF-702 |
GP-IB interface GP-07F |
Method :
|
Semiconductor relay |
Output Level: |
+10.0 ~ -53.0dBm in 0.1dB +117.00~+54.0dBm at 100MHZ to 2GHz.
|
Output Voltage: |
707 ~ 100mV,99.9 ~ 0.0mV 9.99 ~ 0.050mV at 100MHz to 2GHz.
|
Harmonic Wave Attenuation:
|
Less than –30dB at 2nd,3rd harmonic wave, 100MHz ~2GHz, at max. +10dBm less than –25dB at 2nd,3rd harmonic wave, 2 ~3.2GHz at max. +7dBm.
|
Freq. Characteristics: |
±1.5dB, 100MHz~2GHz, at max.+10dBm ±2.5dB, 2~3.2GHz, at max. 7.0dBm.
|
Output Accuracy:
|
±0.5dB, 100MHz, at +10~ -34dBm. |
|
|
Conformed Standard |
IEEE488-197B |
Interface Function: |
SH0,AH1,T0,L2,RL1, PP0,DC1,DT0,C0.
|
Control Item: |
Freq., level(dBm) etc. Level available when unit FF-702 installed.
|
|
|
|
Isolated BCD interface IB-07F |
Interface function: |
setting of freq., level parallel BCD code negative, positive logic.
|
Control Items: |
Level(dBm) etc. Level available when Model FF-702 installed.
|
|
|
Rack mounting accessory MM-227 |
Standard Features:
|
Installable into standard rack(JIS6010) rack mounting bracket, side plates. |
|
|